Sikkens Proluxe Cetol Srd Translucent Stain

Posted on

Sikkens Proluxe Cetol Srd Translucent Stain – Sikkens Proluxe Cetol SRD is a one-coat, oil-based clear wood exterior paint. Sikkens Proluxe Cetol SRD is designed for use on a variety of wood surfaces such as siding, rails, decks and logs. You can choose from 8 wood colours.

Free ground shipping on 1 gallon and 5 gallon buckets. We offer free shipping on 1 gallon and 5 gallon buckets of this product in the lower 48 states. This offer is valid in Alaska, Hawaii and the United States. It does not apply to regions. Free shipping applies to this product only and does not apply to your entire order.

Sikkens Proluxe Cetol Srd Translucent Stain

Sikkens Proluxe Cetol Srd Translucent Stain

The coin’s signature high-quality formula remains intact. Only the name changed. Whether the name is Sikkens or Prolux, you can confidently say that the product in the box is the same. For more information from PPG regarding this change, please click here, here or here.

Sikkens Cetol Srd Wood Finish Natural 078

Sikkens Proluxe Cetol® SRD Wood Finish provides a high-quality, clear, non-film-forming oil-based finish for a variety of outdoor wood surfaces such as logs, siding, railings, decking and deck furniture. This easy-to-use, one-layer formula contains finely milled translucent iron oxide pigments to provide rich, natural color.

• Sikkens Proluxe Cetol SRD can be used for wood walls, siding, garage doors, outdoor furniture, trim, windows, fences, front doors, log homes, barns, stairs, boat docks and more.

• Cetol SRD can be used on many types of wood including cedar, spruce, pine, spruce and redwood.

• You can use Sikkens Proluxe’s ​​’Color Your Home’ website to design how your home will look with Sikkens Proluxe Cetol finish.

New 5 Gal Sikkens Proluxe Cetol Srd Exterior Stain Color Natural 078 Two Available For Sale In Shakopee, Mn

• Please note that different computers display colors differently, so the color of the patch you receive may not exactly match.

• You can also purchase boxes of color samples if you want to test how your home will look in a particular color.

• Actual coverage may vary depending on wood type, age, texture and application method.

Sikkens Proluxe Cetol Srd Translucent Stain

• Natural oak (005) – (SIK240-005). Dark Oak (009) – (SIK240-009); Mahogany (045) – (SIK240-045); Nut (072) – (SIK240-072); Rice (077) – (SIK240-077); Natural (078) – (SIK240-078); Teak (085) – (SIK240-085); Redwood (089) – (SIK240-089)

Ppg Sik500 190/01 Proluxe Srd Semi Transparent Wood Stain, Matte Clear Tint 56198655348

• Sikkens Prolux Cetol SRD RE is a low-emission version of Cetol SRD dye. The following states and provinces specify that only low-emission versions may be shipped to their territories.

• Cetol SRD RE should be used instead of Cetol SRD in the following states: CA, CT, DC, DE, IL, MA, MD, ME, NH, NJ, NY, OH, PA, N.E. Virginia. Corners (Counties – Arlington, Fairfax, Loudoun, Prince William, Spotsylvania, Stafford; Cities – Alexandria, Fairfax, Falls Church, Fredericksburg, Manassas, Manassas Park). Cetol SRD RE is only available in the above mentioned areas.

• PPG announced that Proluxe Cetol SRD Wood Stain is now Proluxe SRD Wood Stain. Click here for more information about this change.

• Drying time – minimum 24 hours at 68°F and 65% relative humidity. Drying times will be longer if the temperature is below 50°F (10°C) or if the humidity is high. Sikkens Proluxe Cetol Srd Re Natoak 1g

• This time will be longer if the temperature is low, the humidity is high, the film is thick or the ventilation is bad. Avoid harsh friction immediately after application.

Before applying Sekens Prolox Citol SRD Wood Polish, thoroughly clean and dry all wood surfaces to remove dirt, grease, grime, mold and previous coatings.

• The best way to smooth vertical wood surfaces is to sand them with 80-120 grit sandpaper. However, the following preparation can also be used instead of sanding.

Sikkens Proluxe Cetol Srd Translucent Stain

2. Apply 4 ounces 100% Trisodium Phosphate (TSP) powder or a phosphate-free alternative to a cleaning solution of 1 quart of liquid bleach and 3 liters of water to the wood surface. Use a garden sprayer or heavy-duty nap roller cap.

Ppg Proluxe Stain Products — Days Paints & Design

3. Leave the solution on the wood for 15 to 20 minutes and scrub the surface with a stiff brush to remove any paint or weathering. Do not allow the solution to dry on the wood surface.

4. To maximize cleaning effectiveness and prevent wood damage, rinse the wood with generous amounts of clean fresh water using 500 to 800 psi of pressure with the nozzle 8 to 12 inches from the surface. the fish

5. Allow surface to dry for at least 48 hours or reduce moisture content to 18% or less before finishing.

6. Sand all cleaned wood using 80-120 grit sandpaper on vertical surfaces and 60-80 grit sandpaper on horizontal surfaces. Be sure to sand the wood grain to remove any sanding powder.

Ppg Proluxe 1 Gal. Teak Srd Exterior Transparent Matte Wood Finish

7. Prolux Cetol SRD Wood Finish should be applied within one week of preparation on horizontal surfaces (decking) and within four weeks on vertical surfaces (siding), unless the surface is free of dirt, grease, grease or mould. please.

• New pressure-treated lumber requires a six-week drying period. Water repellents require one year of weathering before installation.

• Rough wood less than 4 weeks old should be brushed with stiff bristles to remove dirt and loose fibres. If debris is still present, follow preparation steps.

Sikkens Proluxe Cetol Srd Translucent Stain

• Gray or weathered wood affected by blue rot or nail rust can be treated after surface preparation by placing a solution of 4 ounces of oxalic acid crystals in 1 gallon of warm water. Leave this solution on the affected area for 15 to 20 minutes and then wash it off with clean water. Allow to dry for 48 hours before painting.

Staining Over Sikkens Cetol Srd

• It is always recommended to perform a full system color test on a wooden sample.

Pre-painted wood – Before applying the Cetol SRD wood finish, any stains, varnishes or sealants must be completely and thoroughly removed. After removing the previous layer, clean and prepare the surface as described above.

New Wood – Clean and prepare all wood surfaces as described above. Pressure-treated lumber must be properly cured, dried to a moisture content of 18% or less, and free of salts and other water-soluble substances before staining. Waterproof treated wood requires at least one year of weathering before cleaning and use.

Exotic hardwoods – ipe, mahogany, ironwood, tigerwood and teak have a dense cellular structure, which may reduce the ability of paint to penetrate the wood surface. Clean and prepare all wood surfaces as described above. Before applying paint, clean the surface with acetone.

How To Stain And Seal A Wood Pergola

Sikkens Prolux Cetol SRD cannot be applied if the wood moisture content exceeds 18%.

●If applied to wood with a moisture content greater than 18%, mold may form beneath the finish, causing peeling, cracking and blemishes over time.

• We recommend testing the moisture content of your wood with a moisture meter before starting a staining project. Good moisture meters are available at most hardware and home improvement stores.

Sikkens Proluxe Cetol Srd Translucent Stain

• Fill all joints, cracks and nail holes with a high quality acrylic latex filler/filler such as Perma Chink Energy Seal or Weatherl UV Guard Premium Caulk before applying Sikkens Prolux Cetol SRD.

Sico Proluxe (formerly Sikkens) Natural Deck & Fence Stain

• Any cracks or surface checks that may trap water should be sealed immediately to prevent future rot and decomposition.

• Some larger cracks may require a closed cell support bar to isolate and fill the space to ensure proper sealing.

• Inspecting all corners, butts, windows and doors once a year will help maintain the insulation and longevity of your home.

• Test water absorption by spraying water on the wood surface. If the water is absorbed within 30 seconds to 2 minutes, depending on the climate, the surface is ready for finishing. If water is not absorbed, wait 30 days and test again.

Proluxe Cetol Srd Teak Exterior Stain, 5 Gal., 398 114

• Mix it well using an electric drill before use and periodically during application. Mix all products before starting to avoid color contrast.

• The recommended application method is brushing. Use a natural-bristle brush (such as the Wooster 4-Inch Oil Stain Brush). If applying with a roller or airless sprayer, backbrush immediately to ensure penetration and avoid an uneven finish. For airless spraying, use a 0.011-inch to 0.013-inch tip at 1,200 to 1,700 psi and adjust pressure as needed.

• When using Sikkens Prolux Cetol SRD, brushing is necessary for application on countertops and other horizontal surfaces.

Sikkens Proluxe Cetol Srd Translucent Stain

• Apply when surface and air temperatures are between 50°F (10°C) and 90°F (32°C).

Sikkens Cetol 1 Translucent Exterior Stain 5 Gallons

• Do not place in direct sunlight if rain, snow, heavy snow, or low temperatures below 40°F (4°C) are expected within the next 48 hours.

• After priming, apply one coat of Proluxe Cetol SRD and wait at least 24 hours between each application.

• The first layer must be completely dry before applying the second layer. If possible, cover with the first layer. During use, get into all the grains, nail holes, recesses and crevices of the wood edge.

• Apply a thick layer with a brush, keeping the edges damp to prevent streaks. Start at one end of the board or log and brush in the direction of the wood grain.

Proluxe Srd Semi Transparent Wood Finish

Sikkens cetol srd exterior translucent, sikkens cetol srd, proluxe cetol srd, sikkens proluxe cetol srd re, sikkens cetol srd natural 078, sikkens proluxe cetol srd natural 078, sikkens proluxe cetol srd cedar 077, sikkens proluxe cetol srd exterior wood finish, sikkens proluxe cetol srd, sikkens cetol srd natural, sikkens cetol srd stain, sikkens proluxe cetol srd colors