Spraying Emerald Urethane Trim Enamel With Hvlp – The makeup today was a little different than usual, this time it was my husband who has never worked on a project from start to finish. Takes you on a tour of his own furniture renovation.
I think he only used the paint sprayer I set up once or twice. And that was probably 7 years ago.
Spraying Emerald Urethane Trim Enamel With Hvlp
Sometimes it helps with things like cleaning or scrubbing. And it always helps to move and lift the furniture. But painting and decorating has always been my job.
Reviews For Husky Gravity Feed Composite Hvlp Spray Gun
Of course I came to help him…and stress him out…lol, he is such a good sport!
I can also earn money on qualifying purchases with other companies or receive free products to review and use. All opinions are my own.
First I removed the old hardware. It was a metal plate attached to the dresser. After that I removed the disk as well.
Sawmill Creek Woodworking Community
Then I clean the cabinet with a scraper. Cutter and a wet cloth After that I pulled out all the drawers and vacuumed out all the bad dust and cobwebs that were in them.
I often help clean the inside of the closet. Since my wife hates the idea of being surprised by spiders…I stayed in my comfort zone when doing the procedure…haha.
Before we go any further We knew we had to do something about the damaged surface of the vanity. So we tap it and remove the top and two drawers.
Graco Gx19 Airless Sprayer Review For Painting Cabinets
I ended up having to use two coats of chemicals to completely remove the old paint.
After the wood was completely dry, there were a couple of tough spots that I had to sand down to bare wood. But in the end I had a nice smooth wooden surface!
Find step-by-step instructions on how to remove wood stains here! Check out the best tools for removing old paint or texture from wood here.
Fuji Spray 2895 T75g Q5 Platinum
Then before we start painting. We still have a lot of repairs to do on a lot of the veneer that has chipped at the base of the vanity.
So we turn the dresser upside down and cut all the loose veneer. I then filled all the plywood boards with Bondo.
I made a rookie mistake and let the Bondo harden too quickly. So I had to mix up another batch of Bondo to fill in the rest of the chipped veneer.
My Husband’s First Furniture Makeover
Check out the full tutorial on how to repair chipped wood and repair damaged veneer here! And learn about the best furniture polishers in this post!
Get our super handy Furniture Repair eBook with all our furniture repair tips for just $14. You can print it out and have instant access when you encounter damaged furniture. And definitely knows how to fix it!
Then I used wood filler to fill in the small scratches and scuffs on the vanity. and some Bondo-ed areas. Learn about the best wood fillers for furniture here.
How To Apply Sherwin Williams® Emerald® Paint
After the wood putty has dried, I then sand the wood putty down. and polish the rest of vanity. Read this post to learn about the importance of sanding before painting furniture.
Then I vacuum everything and use a cloth to remove all the dirt.
Then it was time for the prime minister. We used BIN shellac primer which my wife tinted grey.
Spraying Benjamin Moore® Advanced® Paint Complete Guide
((I’ve never had the paint department paint me a BIN, but this time they agreed to try. This color may not be the prettiest color ever. But they darkened the color. And that’s good enough for me) )
I rolled the first coat of primer on the dresser. Allow to dry for an hour between coats. Learn all about the best paint rollers for furniture here!
It has more texture than I would like when dry. So I ground the meat a little. But I went down too far into the forest. Beginners make mistakes again! Lol
My Review Of Graco Fflp Tips For Spraying Cabinets
Then I vacuumed again and used a tack cloth to clean up all the dirt.
Then I painted a coat of primer on it as well. This time I just tried some primer on the roller … And it looks much better. There is still some texture, but definitely not as much as before.
And this time, when I sanded the surface, I sanded it by hand with 220 grit because I was worried about sanding the primer again.
Best Paint For Spraying Furniture
I can control the amount of rubbing better than before! Then I cleaned everything again.
I also sprayed clear shellac on the top and two drawers that I intended to stain. Natalie says she’s heard it helps the wood stain absorb more evenly. So I thought I’d give it a try.
Read this post to learn more about the best base colors for painting furniture. (And how to choose the right color)
Emerald Urethane Trim Enamel
Well, after selecting all the primary colors. Finally I’m ready to paint. I used Sherwin Williams Emerald urethane enamel in this unnamed color.
((I think this color would be easier for her to use. Instead of a color that requires a topcoat. Sometimes topcoats can be very painful. Especially black colors))
I diluted the color to about 10% and filtered it through a color filter as Natalie said. I then put the red 4mm tip on the HomeRight paint sprayer and tested the spray.
The 5 Best Tools For Any Furniture Makeover • Refashionably Late
Read more about HomeRight Super Finish Max water-based paint here. See my instructions on how to clean a HomeRight paint sprayer.
Mind you, this was my first time using a paint sprayer to actually paint furniture. And I was really nervous!
((And how many times have I said “Look at my video. It’s all over there.” Haha. I want him to try the picture without any special help))
Professional Review Of Sherwin Williams Pro Classic Paint
And it takes some time. But when the first coat is done, my confidence has increased.
Turns out I sprayed the paint a little too lightly and the paint had more texture than I wanted. But overall it still looks pretty good. When the first coat was dry I sprayed 2 coats.
This time I adjusted the paint sprayer to spray a little harder to try to paint it a little thicker hoping to better smooth out for an even finish.
Spraying Sherwin Williams Emerald Urethane With Hvlp Sprayer
Then my wife removed the plastic from the top to reveal it all.
((And it’s not surprising that Taylor told him I didn’t like it. The attached head and the attached boxes need some green in between. Or do I have to paint one of them))
When he showed me I agreed… So we went to plan B and I founded the top of the vanity. I ended up applying 4 light coats of primer.
How To Spray Paint Wood Furniture
I tried rolling it into a thin sheet. So there isn’t much texture left. But then Natalie noticed that the wood fibers were not added after two coats.
So I applied more primer to try to deepen the grain of the wood. Read this post to learn more about how to hide wood grain when painting.
Then it’s time to grind and grind some more! I sanded everything (except the other two drawers down) with 220 grit to remove most of the surface and give it a smoother feel.
Sherwin Williams Emerald Urethane Paint
Because I had to spray paint again. So I thought I might as well try to make the body spray paint smoother than before.
This time, when mixing the colors, I made it 15% thinner, hoping it would create a smoother surface. So we added 16 ounces of paint to 2.5 ounces of water and mixed it well.
We used the 4mm tip of the paint sprayer again, then I tested the sprayer. Adjust the spray volume to a position that feels comfortable. and spray a layer on top
Sherwin Williams Emerald Urethane Trim Enamel Bull Crap. Help?
Half of the sprayer started getting on me and it wasn’t spraying as much paint as before. So the ending didn’t look good.
So I took apart the spray head. Clean the 4mm tip and spray it back again. Learn all about how to clean a paint sprayer here!
But first, before painting again. I lightly sanded the drawers and tops. To make the surface smooth again, I remove the dust again. Next, I sprayed another coat of paint on all the boxes.
Tips For Spray Painting Bookshelves
The spray began to spray less and less paint. As I near the end, so the top and drawers still don’t look good.
So I messed with the tip of the syringe again. Until it works, while
Emerald urethane enamel, spraying acrylic enamel hvlp, emerald urethane trim enamel cure time, emerald urethane trim enamel reviews, emerald urethane trim enamel dry time, urethane trim enamel, emerald urethane trim enamel hvlp, emerald urethane trim enamel, emerald trim urethane, emerald urethane trim enamel lowes, sw urethane trim enamel, spraying emerald urethane trim enamel
