Applying Oil Based Deck Stain – You’ve done your due diligence and discovered that cedar is one of the best woods for your porch. But you did it. Most of the finishing products you know worked well on your old pine or spruce deck are now harsh on your new cedar deck. Bottom line, you’re on your third complete strip and about to put an ax in your patio! wait!!
Cedar is a wood that contains fatty sap (tannin) that repels most conventional stain products. However, it is this property that also makes this wood resistant to fungi, insects and other decaying substances. Additionally, cedar is naturally stable and will be highly resistant to cracking and warping. So with the right end product you are still in good hands with your cedar deck.
Applying Oil Based Deck Stain
In this article, I will present 4 steps that will allow you to enjoy your cedar balcony comfortably. Note that these steps must be followed. You don’t want to relive your old nightmare!
Semi Transparent Waterproofing Wood Finish Penetrating Oil No. 4633
To provide maximum protection and care for your cedar deck, you must follow several steps carefully.
There are conditions to be preferred when applying exterior finishes. If you wait more or less, you may need to adjust your finish and application procedure to avoid problems such as peeling or graying. Additionally, better conditions will improve the durability and long-term aspect of your patio.
Canada recommends letting the cedar dry for about 6 months before applying eco-friendly oil to the cedar. Since the word count is limited in the application phase, I want to share some details in this article.
Environmental oils protect your deck by saturating the wood’s pores with oil. In the case of green cedar (not dried), it already contains a certain amount of tannin. So oil saturation will happen very quickly and problems can arise due to oversaturation. To avoid waiting 6 months and thus risking the cedar turning gray, it is better to apply a thin layer of the product the first year and normally every two years from the following year.
The Ultimate Guide To Staining Your Fence Or Deck
Depending on the weather, Mother Nature should also be present. Allow 2 to 3 days of good weather without intense sun. After a rainy period, wait at least two days for good weather before applying oil or stain. Using a hygrometer, make sure the wood’s humidity is below 20% and preferably around 15%.
Are you expecting good weather? Note that when your cedar patio is sanded, there should be no build-up on the surface. No more barbecue, dirt or well-kept shoes! If you plan to sand one day and apply your finished product the next, a tarp is highly recommended to avoid problems with morning dew.
A cedar patio that has been exposed to the sun for more than a year or two can turn gray. If this happens and you decide to use the bleaching product, please note that the product must be washed well so that no oil or stains appear on the surface.
The presence of mold, moss, algae, grease stains and even bleach are all contaminants that can prevent an oil or stain from working well on wood. It is important to clean the surface of your cedar with a cleaning product such as GLOUROS 1806 before moving on to the sanding step. In fact, grinding has the effect of removing even more impurities.
Preserva Wood 1 Gal. Oil Based Redwood Penetrating Exterior Stain And Sealer 40102
Whether old or new, your cedar patio needs sanding. He removes glaze from planing wood in sawmills and opens the grain of the wood. Most synthetic stain products require progressive sanding up to 80 grit. But if you choose to apply a natural oil like ALIS 579, start with 80 grit and then 100 grit. To reduce long-term product consumption, you can continue. Sand with 120 or even 150 grit paper.
Remember that cedar is a soft wood and its rough sanding easily reveals flaws. After you finish the sanding, take a closer look at the ends of the nails and screws. You will probably need to push or poke them in to avoid painful connections.
Quick but important, this step gets the surface clean and clear before applying the product. Use a vacuum cleaner or a broom.
This step is the most beneficial. Depending on your preference, apply a clear or semi-opaque oil finish or a finish between clear and opaque with a traditional stain.
Oiling A Timber Deck: This Is The Only Tip You’ll Need!
A more environmentally friendly water-based stain is suitable for pine, while a natural oil-based stain is more suitable for cedar. It is important to prefer a natural, oil-based stain rich in pigments. The increased amount of pigment is ideal for preventing wear from traffic and UV rays. If you want to match the exact color of your home, it can be important to choose a traditional stain that offers a variety of colors.
Brush. This is the best application tool. Bristles should be synthetic when using natural silk and stained when applying natural oils.
A roller can be used to apply natural oils or stain removers, but it is followed by a brush. So if you have a helper, it can be faster for one person to apply with a roller while the other spreads the coat evenly with a brush. This is the only advantage of applying on the roller.
It is recommended to apply 2 coats of oil or stain to your cedar deck. In the case of natural oils, the second layer should be thin as these are products of pregnancy and should not accumulate on the surface like synthetic stains. This natural oil saturation principle allows for reduced use of the second coat and subsequent maintenance coats.
Deck Stain Companies Promise 4 Year Guarantees. Why Do So Many Not Hold Up?
Depending on the product chosen, you may need to wait 6 to 24 hours between coats. However, you should allow the surface to dry for at least 48 hours before walking on it. And if you want to wash your cedar deck, wait at least 30 days for the new coating to cure. Always take the time to read the label and follow the manufacturer’s recommendations to the letter.
Caring for your cedar patio is important if you want to keep it beautiful throughout its life. This includes cleaning and applying a maintenance coat. Depending on the type of product, it may be necessary to re-sand the surface before applying the restoration layer.
It is recommended to clean the cedar balcony once or twice a year and follow the manufacturer’s instructions. Ignoring this precaution may result in incompatibility with the recovery layer.
A burning question. How often should maintenance layers be applied? It depends on the quality of the product, the weather conditions, the pH of the pine wood and the presence of impurities at the time of use. take a breath! It also depends on UV and weather exposure, the structural layout of your deck, the amount of product applied, the quality of the sanding, your tolerance for wear on your deck, and more!
Different Types Of Exterior Stains For Wood Projects
It is not impossible to reapply the maintenance coating every year under some extreme conditions and under more ideal conditions the finish will be fine for up to 4 years. However, it is more common to stick to a two-year shelf life.
If you choose to apply a lower quality product or if you decide to postpone maintenance, you may need to re-sand before applying a new restoration coat. It is good to know that this step is not necessary in the environmental oil ALIS 579 – terrace oil. You simply clean and reapply a thin maintenance layer.
The mixture of ting oil and linseed oil in the product ALIS 579 works well on cedar, as it has a higher holding power and penetrates deeper than the usual stains. For more information on natural oils, discover ALIS 579 oil, an oil-based stain that respects health and the environment, ideal for cedar surfaces and with many benefits. In addition, find out step-by-step how to apply ALIS 579 Natural Oil to your exterior wooden surfaces. Tire painting is an important step in your home maintenance routine. This not only improves the look of your wooden deck but also waterproofs it and protects it from warping.
A thin stain is water repellent and can also help protect your wood from UV rays, even when using clear paint, depending on the brand you use. So let’s get right to it and talk about how to stain your deck.
How To Care For Your Balau Or Garapa Hardwood Deck
The first step to painting is choosing a color and checking the weather. You want to paint your deck on a dry day. This is usually not a one-day project, so be careful.
Cabot oil based deck stain, oil based deck stain, oil based solid deck stain, applying water based stain, applying oil based stain, best oil based deck stain, oil based deck stain colors, applying stain to deck, applying water based concrete stain, applying deck stain, oil based deck stain canada, behr oil based deck stain
